YEAR |
CLIENT |
|
PROJECT |
|
|
|
|
|
|
|
Installation of anode for TTM project.
|
|
|
|
Anode installation for Shakalin project.
|
|
|
|
To perform dye penetrant inspection for 24” dia pipes (internal) for jintan project.
|
2004 |
BREDERO SHAW |
|
Installation of anode for Jintan project. |
2004 |
BREDERO SHAW |
|
Removal of concrete and asphalt enamel coating . |
2004 |
BREDERO SHAW |
|
Installation of anode (normal & retrofit) for TTM project |
2004 |
PPSC |
|
Pipe repair for carbon steel pipes ( cold cutting and re-beveling & grinding ) |
2004 |
PPSC |
|
Installation of anode for epmi project |
2004 |
PPSC INDUSTRIS S/B |
|
Perform pipe hot cutting mand inspecrtction for epmi du 3289 project |
2004 |
PPSC |
|
Pipe blasting and application of heat shrink sleeve for farley baram project |
2004 |
PPSC INDUSTRIES S/B |
|
Pipe blasting and application of heat shrink sleeve for farley epmi project |
2004 |
PPSC INDUSTRIES S/B |
|
Cutting & rebevel end damages linepipes use hot cut for epmi project |
2004 |
PPSC INDUSTRIES S/B |
|
Removal of concrete to kit type b anode for shakalin off shore project |
2004 |
PPSC INDUSTRIES S/B |
|
Doubler plate installation for 4.5 pipes ( pe coating ) for shakalin project |
2004 |
PPSC INDUSTRIES S/B |
|
Anode installation for farley baram project |
2004 |
PPSC INDUSTRIES S/B |
|
Fabication and installaion of sacrificial cathodic protetion systn onto the aspart enamel coated linepie c/w double plate installation |
2004 |
SAIPEM/PPSC INDUSTRIES S/B |
|
Pipe bundling strapping, rigging and handling for shakalin project |
2004 |
PPSC INDUSTRIES S/B |
|
To fabricate and install d. Plate for 4.5 pipes coated with pe for shakalin 2 phase 2 project |
2004 |
EPMI/PPSC INDUSTRIES S/B |
|
To blast to sa 2.5 & apply heat shrink sleeve onto bends, to blast & 3 coat system for emepmi project |
2004 |
PPSC INDUSTRIES S/B |
|
Design, procurement, fabricaion and instalation of hydraulic clamping equipment for the installation of anodes, infilling of anode gaps on pipes already cwc, re-fitting of anodes due to misalignment of anode inserts for shakalin project. |
2004 |
SAIPEM/PPSC INDUSTRIES S/B |
|
Anode installation (retrofit) for shakalin ii phase 2 project |
2004 |
SAIPEM/PPSC INDUSTRIES S/B |
|
Fabrication, installation, testing and commissioning of system 2 hydraulic jack system for aoe installation for shakalin ii phase 2 project |
2004 |
SERAWAK SHELL/BREDERO SHAW |
|
Installation of sacrificial cathodic protection system for shallow clastic project |
2004 |
BREDERO SHAW |
|
Installation of anode for john brookes project |
2004 |
PPSC INDUSTRIES S/B |
|
Stripping of 3lpp coating for 3jts offshore linepipe 519.40mm od x 19.7wt for bongkot project |
2004 |
BREDERO SHAW (M) S/B / PETRONAS CARIGALI
SDN. BHD. |
|
Anode installation for ruby project pipe size 10”, 3lpp coating, 32 anode sets. |
2004 |
EMEPMI/PPSC INDUSTRIES S/B |
|
Supply & install 50mm dia 5mm thick doubler plates, install cathodic proection system thick 35mm for emepmi seligi a to tapis a project. |
2004 |
PPSC INDUSTRIES S/B |
|
Installation anode id 565mm, pipe coating 3lpp, anode id 554mm, pipe coating 3lpp, welding of steel strap (z plate) & mob-demob for bongkot project. |
2004 |
PPSC INDUSTRIES S/B |
|
Fabriation and installation of pipeline attachments and anode installation anode id 605mm, pipe coating 3lpp for bongkot project. |
2004 |
PPSC INDUSTRIES S/B |
|
Anode installation anode id 554mm & 365mm, pipe coating 3lpp for bongkot project. |
2004 |
PPSC INDUSTRIES S/B |
|
Anode installation anode id 365mm & 605mm, pipe coating 3lpp for bongkot project. |
2004 |
PPSC INDUSTRIES S/B |
|
Blasting and coating of 42 inch linepipe for scp project. |
2004 |
PPSC INDUSTRIES S/B |
|
Removal of concrete coating on pipe od 22”, 3lpp coating, and pipe cold cutting for bongkot project. |
2004 |
BREDERO SHAW (M) S/B |
|
Mechanical testing(destructive testing) and dye penetrate test and other applicable nondestructive testing for high strength steel pipe for shenzen project. |
2004 |
BREDERO SHAW (M) S/B |
|
Installation of pipe caging around 3lpp pipe prior to concrete coting for shenzen project. |
2004 |
BREDERO SHAW (M) S/B |
|
Anode installation for pipe id 18”, 400mm l, 50mm thick for shenzen project. |
2004 |
BREDERO SHAW (M) S/B |
|
Trial feet anode id 18”,mob & demob for apache john brookes project |
2004 |
BREDERO SHAW (M) S/B |
|
Installation of caging/reinforce steel around the coated pipe for ruby and shallow clastic project. |
2004-2005 |
BREDERO SHAW (M) S/B |
|
Caging insertion for anode installation for pipe id 16”, 90mm & 45mm thick for champion west project. |
2004-2005 |
BREDERO SHAW (M) S/B |
|
Anode installation for pipe id 16”, 90mm & 45mm thick for champion west project. |
2004-2005 |
BREDERO SHAW (M) S/B |
|
Anode installation for towngas-shenzen to tai po twin smaine gas pipeline project. Pipe size 18” 840 jts |
2004-2005 |
BREDERO SHAW (M) S/B |
|
Fabrication and installation of attachment and other accessaries including the installation of cathodic protection system for pipe od 20”, 50mm & 45mm thick for lamma project. |
2004-2005 |
BREDERO SHAW (M) S/B |
|
Intallation of caging/reinforce steel for the anode installation of pipe od 20”, coating 50mm & 45mm thick for lamma project. |
2004-2005 |
BREDERO SHAW (M) S/B |
|
Additonal work for anode installation (thermit weld for champion west project) |
